News

  • 0
  • 0

What is Manganese Dioxide MnO2 Powder?

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net



U.S. natural gas futures rose about 5 percent to a near nine-week high as global energy prices surged on concerns over a pricing plan for energy exports, keeping U.S. LNG export demand near record highs. U.S. natural gas prices have risen despite forecasts of mild weather and lower-than-expected demand, which will allow utilities to fill up storage facilities next week. On Wednesday, Germany launched an emergency plan to manage gas supplies in Europe's largest economy. If natural gas supplies are interrupted or stopped, the German government could take unprecedented steps to limit electricity supply.
Affected by the increase in the price of natural gas, the price of the MnO2 will also increase.

Introduction to Manganese Dioxide MnO2 Powder
Manganese dioxide is also known as manganese peroxide or black manganese oxide. It is the oxide of tetravalent manganese. The chemical formula is MnO2. The fHm (298K) is -520.71kJ/mol, the melting point is 847, and the density is 5.026 g/cm3. The natural MnO2 exists in pyrolusite, and it is a black rhombic crystal or black-brown powder. It has a tetrahedral lattice, which is amphoteric manganese oxide. It is insoluble in water and nitric acid, but gives off oxygen and forms manganese sulfate in hot concentrated sulfuric acid and is chlorinated to manganese chloride in hydrochloric acid. It is fused with caustic soda and oxidant, giving off carbon dioxide to form permanganate. Manganese dioxide is a strong oxidant and can cause combustion and explosion by friction or co-heating with organic matter or other oxidable substances such as sulfur, sulfide, and phosphide. The product exhibits reducibility with strong oxidants such as hydrogen peroxide. MnO2 is converted into Mn2O3 when heated above 480 in air, and Mn3O4 when heated above 900. It is widely used in steelmaking, glass, ceramics, dry cells, etc.
 
In nature, it exists in the form of pyrolusite and hard manganese ore. It can be extracted from pyrolusite, and can also be prepared by heating decomposition of manganese nitrate or electrolytic manganese dioxide salt. γ -Mno2 is active and can be used as a cathode material for batteries to eliminate polarization. Manganese dioxide can be used as a rust remover, oxidizer, dry battery drying agent, and paint drying agent, also used in manganese salt preparation and the glass industry. 
 

Physicochemical Properties of Manganese Dioxide MnO2 Powder
For manganese dioxide, oxygen atoms are at the top of the octahedron corner and manganese atoms in the octahedron. Octahedron is connected to form a single chain or double chain, forming a tunnel structure of the gap, octahedron, or hexagonal dense or square dense accumulation. Oxidizability: Manganese dioxide is a non-salt oxide, non-amphoteric oxide which does not react with either acid or base. In the presence of reducing agents, is oxidizing. Such as manganese dioxide into the hydrogen flow heating to 1400K to get manganese oxide. Manganese dioxide is heated in an ammonia gas stream to obtain brown and black manganese trioxide. Manganese dioxide is reacted with concentrated hydrochloric acid to obtain manganese chloride, chlorine gas, and water.
 
In the presence of strong oxidants, it also exhibits reducibility. If the manganese dioxide, potassium carbonate, and potassium nitrate or potassium chlorate mixed melting, people can get dark green melt, melt it in water cooling people can get six valence manganese compound potassium manganate. It is a strong oxidant in an acid medium. Strong oxidant, does not burn on its own, but it aids combustion, so please do not place it with flammable materials.
 

Manganese Dioxide MnO2 Powder Properties
Other Names manganese oxide, MnO2 powder
CAS No. 1313-13-9
Compound Formula MnO2
Molecular Weight 86.94
Appearance black powder
Melting Point 535°C
Boiling Point N/A
Density 5.03g/cm3
Solubility in H2O insoluble
Exact Mass 86.9279

 

Manganese Dioxide MnO2 CAS 1313-13-9
 

 
Applications of Manganese Dioxide MnO2 Powder
1. Manganese dioxide is a very good decolorizing agent in the glass manufacturing industry, which can oxidize low ferric salt to high ferric salt, so that the blue-green glass into weak yellow.
2. In the electronic industry it is used to produce manganese zinc ferrite magnetic materials.  
3. Used as the raw material of iron and manganese alloy in the steelmaking industry and heating agent in the casting industry. 
4. Used in gas masks to absorb carbon monoxide. 
5. In the chemical industry it can be used as an oxidant, catalyst for organic synthesis, paint, and ink desiccant.
6. Used as an accelerant for match industry, as a raw material for glaze medicine of ceramics and enamel and manganese salt. 
7. Used for fireworks, water purification, iron removal, medicine, fertilizer and textile printing, dyeing, etc.  
8. Electrolytic manganese dioxide is an excellent depolarizing agent of battery. Compared with the dry battery produced by natural discharge manganese dioxide, it has the characteristics of large discharge capacity, strong activity, small volume, and long life, so electrolytic manganese dioxide has become a very important raw material in the battery industry. 
9. Electrolytic manganese dioxide due to its strong catalytic, oxidation/reduction, ion exchange, and adsorption capacity, after treatment and molding, it is a comprehensive excellent water purification filter material. Compared with the common use of activated carbon, zeolite, and other water purification filter material, it has a stronger ability to decolorize and remove metal. 
 

Main Supplier of Manganese Dioxide MnO2 Powder
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including silicon powder, nitride powder, graphite powder, zinc sulfide, calcium nitride, 3D printing powder, etc.
If you are looking for high-quality manganese dioxide MnO2 powder, please feel free to contact us and send an inquiry. ([email protected])

 

The current international situation is highly uncertain, and its economic impact has not been able to be assessed properly. In addition, rising energy and commodity prices and supply chain disruptions are expected to push the price of the MnO2 higher.

Inquiry us

High Purity Iron powder Fe Powder CAS 7439-89-6, 99%

High Purity Copper Powder Cu Powder CAS 7440-50-8, 99%

High Purity Tin Sn Powder CAS 7440-31-5,99%

High Purity Nano Ag Silver powder cas 7440-22-4, 99%

High Purity Molybdenum Powder Mo Powder CAS 7439-98-7, 99.9%

High Purity Colloidal Silver Nano Silver Solution CAS 7440-22-4

High Purity Boron Carbide B4C Powder CAS 12069-32-8, 99%

High Purity Silicon Si powder CAS 7440-21-3, 99%

High Purity Tungsten Carbide WC Powder Cas 12070-12-1, 99%

High Purity 3D Printing Inconel 625 Powder

High Purity Spherical Graphite C Powder CAS 7782-42-5, 99.9%

High Purity Copper Oxide CuO powder CAS 1317-38-0, 99.9%

High Purity Colloidal Gold Nano Gold Solution CAS 7440-57-5

High purity Boron Powder Amorphous Boron Powder CAS 7440-42-8, 95%

CAS 4485-12-5 Lithium Stearate Powder

CAS 1592-23-0 Calcium Stearate Powder

CAS 557-04-0 Magnesium Stearate Powder

High Purity Zinc Sulfide ZnS Powder CAS 1314-98-3, 99.99%

High Purity Silicon Nitride Si3N4 Powder CAS 12033-89-5, 99%

High Purity Aluminum Nitride AlN Powder CAS 24304-00-5, 99.5%

Our Latest News

The role of molybdenum in the new energy industry

Molybdenum's role in the New Energy Industry I. Introduction As a result of the recent changes in the global energy market, the energy sector is growing rapidly. The future energy market will include solar energy, biomass, wind, and water power. The…

Application Fields of Nickel Based Alloys

Application Fields of Nickel Based Alloys Nickel-based alloy is based on nickel and is composed of various alloying elements. It has excellent high-temperature resistance, corrosion resistance, oxidation resistance, and mechanical properties an…

What is Zinc Sulfide

Zinc Sulfide: Its chemical formula is ZnS. The molecular weight of the compound is 134.72. It is created by interacting through ionic interactions with zinc ions, (Zn2+), and sulfur ions, (S2-). In the crystal, the sulfur ions form a regular tetra…