Products

  • 0
  • 0

Applications of Tantalum Carbide TaC Powder

Koalas were declared endangered in eastern Australia on Friday, with more and more koalas dying from disease, habitat loss, and other threats. Earlier, the koala was considered a vulnerable species, and the Commonwealth Department of the Environment changed its protection level to endangered on the east coast of Queensland, New South Wales, and the Australian Capital Territory. Many koalas in Australia are infected with chlamydia. The disease can cause blindness, infection, and infertility. Last year, the Australian Koala Foundation said Australia had lost about 30 percent of its koala population in the past three years. Without immediate action, the species could become extinct by 2050.
Unlike koalas, which are on the brink of extinction, the market demand for TaC powder will grow substantially.

Introduction to Tantalum Carbide TaC Powder
Tantalum carbide is a kind of transition metal carbide. Black or dark brown metallic powder, cubic crystal system, hard. Melting point 3880, boiling point 5500, relative density 13.9, hardness 9 ~ 10. Insoluble in water, slightly soluble in sulfuric acid and hydrofluoric acid, soluble in a mixture of hydrofluoric acid and nitric acid.
Its chemical properties are extremely stable. It has excellent physical and chemical properties, such as high hardness, high melting point, good electrical conductivity, and thermal shock resistance, good chemical corrosion resistance, high oxidation resistance, catalytic performance, etc.
 

Tantalum Carbide TaC Powder Properties
Other Names tantalum(IV) carbide, TaC powder
CAS No. 12070-06-3
Compound Formula TaC
Molecular Weight 192.96
Appearance brown to dark brown powder
Melting Point 3850°C
Boiling Point 4780-5470 °C
Density 14.3-14.7g/cm3
Solubility in H2O insoluble
Exact Mass 192.948

 

Tantalum Carbide TaC Powder Cas 12070-06-3

 
Applications of Tantalum Carbide TaC Powder
Tantalum carbide is mainly used for cemented carbide, capacitors, electronic devices, high-temperature components, chemical equipment, and armor piercing shells.

1. Cemented carbide 
Tantalum carbide plays an important role in cemented carbide. It improves the properties of the alloy by improving the fiber structure and phase transformation dynamics, making the alloy have higher strength, phase stability, and processing deformation ability.  Tantalum carbide has a very high melting point (4000) and good thermodynamic stability. Tantalum is particularly effective in promoting nucleation and preventing carbon precipitation from nucleated brittle films formed during late solidification. Its main function is to prevent cemented carbide grain from growing up. In addition, it forms a third dispersion phase with TiC besides WC and Co, which significantly increases the thermal shock resistance, crescent hole wear resistance, and oxidation resistance of cemented carbide, and improves its redness and hardness. 
TaC is added into the alloy in different ways, which will greatly affect the properties of the alloy. On the other surface, the TiC-TaC-WC core phase formed by adding TaC to the alloy as TiC-TaC-WC solid solution has a larger sub-crystal size and smaller microscopic strain than the TiC-TaC-WC core phase, and the former one has better physical and mechanical properties and longer cutting life. 
 
2. Electronics industry 
In recent years, transition metal carbides have attracted much attention due to their chemical stability, high hardness, strong oxidation and corrosion resistance, low resistivity, and many other advantages. Carbide nanomaterials show great potential in metal coatings, tools, machine parts, and composites. Among all the carbide nanomaterials, silver carbide is one of the most popular materials, and also one of the materials with the greatest potential. Tantalum carbide not only inherits many advantages of carbide nanomaterials, but also has its own unique side, such as high hardness (Mohs hardness is 9-10 at room temperature, high melting point (about 3880), high Young's modulus (283-550 GPa), strong conductivity (conductivity is 32.7-117.4μ ω ·cm at 25), high-temperature superconductivity (10.5K), strong resistance to chemical decay and thermal shock, and high catalytic activity for ammonia decomposition and hydrogen separation. 
At present, tantalum carbide powder and whisk tantalum carbide have been prepared by means of carbothermic reduction, thermal plasma, solvothermal, sol-gel, microwave heating, alkali reduction, self-propagating high-temperature synthesis, and high-frequency induction heating sintering.
 
3. Superalloys
Among carbides, the best melting resistance is tantalum carbide (TaC) (melting point 3890) and hafnium carbide (HfC) (melting point 3880), followed by zirconium carbide (ZrC) (melting point 3500). These materials have excellent mechanical properties at high temperatures, far exceeding the best polycrystalline inks. Tantalum carbide, in particular, is the only material that maintains certain mechanical properties over the temperature range of 2900 to 3200. However, the disadvantage of tantalum carbide is that it is very sensitive to thermal shock, and the low thermal conductivity and high thermal expansion coefficient of carbide become the biggest obstacle to the application of aerospace materials. The addition of tantalum carbide to carbon/carbon composites will have higher thermal conductivity and lower thermal expansion conditions, and exert the oxidation resistance and ablative resistance of refractory metals. 
 

Main Supplier of Tantalum Carbide TaC Powder
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including silicon powder, nitride powder, graphite powder, zinc sulfide, calcium nitride, 3D printing powder, etc.
If you are looking for high-quality tantalum carbide TaC powder, please feel free to contact us and send an inquiry. ([email protected])

 

Trafigura, one of the world's largest metals traders, is to take a stake in a new company to supply car and battery makers in Europe with lithium from a refinery in the UK, the Financial Times reported. As part of the investment, Trafigura will seek raw material for Green Lithium, which plans to build a plant in the north of England capable of producing 50,000 tonnes a year and sell the finished TaC powder, etc. If you are looking for high-quality materials, please feel free to contact us and send an inquiry.

Inquiry us

Our Latest Products

High Purity Iron powder Fe Powder CAS 7439-89-6, 99%

Russia's insistence on paying for Russian gas in rubles has rattled European countries: Greece held an emergency meeting of suppliers, the Dutch government would urge consumers to use less gas, and the French energy regulator told consumers not to pa…

High Purity Copper Powder Cu Powder CAS 7440-50-8, 99%

John Albanese, leader of the Australian Labor Party, was sworn in as Australia's new prime minister. After his victory, Albanese said he would "make a big change" in the country's climate policy. "We now have an opportunity to end the 'climate wars'…

High Purity Tin Sn Powder CAS 7440-31-5,99%

How serious are fertility problems today? People don't want to give birth,can't afford it, and can't give birth that has become the "three mountains". The problem of childbirth is related to the people's livelihood. Whether a country can prosper or n…