Metal Alloy

  • 0
  • 0

High Purity Titanium Diboride TiB2 Powder CAS 12045-63-5, 99%

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net



Russian president demanded that exports of Russian gas to "unfriendly" countries be settled in rubles. The demand has raised concerns in Germany about possible supply disruptions and the impact on industry and households if utilities do not pay in robles. Europe gets about 40% of its gas from Russia. Last year, Europe imported about 155 billion cubic meters. Germany, Europe's largest economy, depends heavily on Russian gas.

The chief executive of Germany's E.ON said the German economy would face "significant damage, which should be avoided if possible" without Russian supplies. He also said it would take Germany three years to wean itself off Russian gas.  

In the event of a supply disruption, Germany's gas network regulator would prioritize home heating over industrial use, so energy-hungry manufacturers such as steelmakers would be the first to suffer, he said.

The volatile international situations will continue to affect the markets and prices of many commodities like the Titanium Diboride.

About Titanium Diboride TiB2 Powder:
Titanium diboride powder is gray or gray-black and has a hexagonal (AlB2) crystal structure. Its melting point is 2980°C and it has high hardness. The anti-oxidation temperature of titanium diboride in the air can reach 1000℃, and it is stable in HCl and HF acid. Titanium diboride is mainly used to prepare composite ceramic products. Because of its resistance to molten metal corrosion, it can be used in the manufacture of molten metal crucibles and electrolytic cell electrodes.
Titanium diboride (TiB2) is an extremely hard ceramic with excellent mutation, oxidation stability and wear resistance. Titanium diboride (TiB2) is an extremely hard ceramic used, for example, in special ballistic armor applications. In addition, unlike most ceramic components, it is conductive. It is also a reasonable electrical conductor, so it can use the conduit material in aluminum smelting and can be formed by electrical discharge machining.
Titanium diboride (TiB2) is a ceramic material with high strength and hardness, and its melting point, hardness, strength-to-density ratio and wear resistance are relatively high. However, the current use of this material is probably only in the anti-evolving important application is the use of TiB2 waveguides in the electrochemical reduction of alumina to aluminum metal. If electrical discharge machining of TiB 2 is performed, other applications may develop rapidly. Can be perfected. The wide application of this material may be restricted by economic factors, especially the cost of densifying high melting point materials and the reduction in material performance changes. Feel free to send an inquiry to get the latest price if you would like to buy Titanium Diboride TiB2 Powderin bulk.


Feature of TiB2 Titanium Diboride Powder:
Titanium diboride powder is gray or gray-black and has a hexagonal (AlB2) crystal structure. Its melting point is 2980°C and it has high hardness. The anti-oxidation temperature of titanium diboride in air can reach 1000℃, and it is stable in HCl and HF acid. Titanium diboride is mainly used to prepare composite ceramic products. Because it can resist the corrosion of molten metal, it can be used in the manufacture of molten metal crucibles and electrolytic cell electrodes.

 MF

 TiB2

 CAS No

 12045-63-5

 EINECS

 234-961-4

 size

 5-10um

 purity

 99%

 shape

 Hexagonal crystal

 packing

 Double anti-static packing

 Brand

 TR-TiB2


 Performance of Titanium Diboride TiB2 Powder:

1.   High melting point

2.   High hardness

3.   Wear resistance

4.   Resistant to acids

5.   Excellent conductivity

6.   High thermal conductivity

How is Titanium Diboride TiB2 Powder produced?
Titanium Diboride TiB2 is the most stable of several titanium boron compounds. This material does not appear in nature, but it can be synthesized by carbothermal reduction of TiO2 and B2O3. Like most other covalently bonded materials, TiB2 is resistant to sintering and is usually compacted by hot pressing or hot isostatic pressing. Pressureless sintering of TiB2 can achieve high density but requires liquid sintering aids such as iron, chromium and carbon.
TiB2 does not naturally exist on the earth. Titanium diboride powder can be prepared by various high-temperature methods, such as direct reaction to prepare titanium or its oxide/hydride. When elemental boron exceeds 1000°C, carbothermal reduction by thermite reaction has been developed in various synthesis pathways. Electrochemical synthesis and solid-state reaction were used to prepare more refined titanium diboride in large quantities.


Technical Parameter of  TiB2 Titanium Diboride Powder :

Chemical Composition Ti B O Si Fe P S
Test Result (%) Balance 31 0.45 0.009 0.19 0.01 0.02


Application of Titanium Diboride TiB2 Powder:

Titanium Diboride (TiB2) is a hard material with high strength and high wear resistance at elevated temperatures. The high density, combined with the high elastic modulus and high compressive strength, has to lead to its use in armor components.
It is unaffected by most chemical reagents and has excellent stability and wettability in liquid metals such as zinc and aluminum. This, along with its high electric conductivity, has led to its use in Hall- Héroult cells for aluminum production. It is also used as crucibles for molten metals.Due to its high hardness, extremely high melting point and chemical inertness, TiB2 is a candidate material for many applications.
Ballistic armor
The combination of high hardness and medium strength makes it attractive for ballistic armor, but its relatively high density and difficulty in forming shaped parts make it less attractive than some other ceramics.
Aluminum Smelting
The chemical inertness and good conductivity of TiB2 have made it used as a cathode in Hall-Heroult batteries used for primary aluminum smelting. It can also be used as a crucible and metal evaporation boat for processing molten metal.
Other uses
High hardness, medium strength and good wear resistance make titanium diboride a candidate material for sealing parts, wearing parts and composite materials with other materials and cutting tools.
Used in combination with other major oxide ceramics, TiB2 is used to form composite materials, where the presence of the material helps increase the strength and fracture toughness of the matrix.
Potential applications of TiB2
The current uses of TiB2 are almost limited to special applications in the fields of impact-resistant armor, cutting tools, crucibles, neutron absorbers and wear-resistant coatings.
TiB2 is widely used as a vaporizer for vaporizing aluminum. For the aluminum industry, it is a selective material that can be used as an inoculant for grain refinement when casting aluminum alloys because of its implantability, low solubility in molten aluminum and good electrical conductivity.
TiB2 films can be used to provide wear and corrosion resistance to inexpensive and/or strong substrates.


Storage Condition of Titanium Diboride TiB2 Powder :
Titanium Diboride TiB2 Powder dispersion performance and using effects, therefore, titanium diboride TiB2 powder should be sealed in vacuum packing and stored in cool and dry room, the titanium diboride TiB2 powder can not be exposure to air. In addition, the TiB2 powder should be avoided under stress.

Packing & Shipping of Titanium Diboride TiB2 Powder :
We have many different kinds of packing which depends on the titanium diboride TiB2 powder quantity.
Titanium diboride TiB2 powder packing: vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.
Titanium diboride TiB2 powder shipping: could be shipped out by sea , by air, by express as soon as possible once payment receipt.


Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including boride powder, nitride powder, graphite powder, sulfide powder, 3D printing powder, etc.

 

If you are looking for titanium diboride, please feel free to contact us and send an inquiry, email address: sales3@nanotrun.com


Titanium Boride Properties

Other Names TiB2, TiB2 powder, titanium boride powder
CAS No. 12045-63-5
Compound Formula TiB2
Molecular Weight 69.489
Appearance Gray Powder
Melting Point 2980 °C
Boiling Point N/A
Density 4.52 g/cm3
Solubility in H2O N/A
Thermal Expansion Coefficient 8.1×10-6m/m.k
Thermal Conductivity 25J/m.s.k
Electrical Resistivity 14.4μΩ.cm
Exact Mass 69.96656 Da
   
   

Titanium Boride Health & Safety Information

Signal Word Warning
Hazard Statements H302-H312-H332
Hazard Codes Xn
Risk Codes 20/21/22
Safety Statements 36
RTECS Number N/A
Transport Information N/A
WGK Germany 3

According to the bank of Spain's latest forecast data, the average inflation is expected to hit 7.6% in 2022, but the average wage increase for workers in this country is expected to be less than 4% in 2022. 

If the Bank of Spain's forecast comes true, the gap between price and wage growth in Spain in a single year will be the largest since 1984.

Prices in Spain rose 9.8% year on year in March 2022 and average wages rose 2.4% year on year, with the Bank of Spain forecasting that the country's inflation rate will improve from July.

Recent changes in the international situation have had a big impact on commodity and energy prices. How the prices of the Titanium Diboride will develop in the future is still uncertain.

Inquiry us

High Purity Iron powder Fe Powder CAS 7439-89-6, 99%

High Purity Copper Powder Cu Powder CAS 7440-50-8, 99%

High Purity Tin Sn Powder CAS 7440-31-5,99%

High Purity Nano Ag Silver powder cas 7440-22-4, 99%

High Purity Molybdenum Powder Mo Powder CAS 7439-98-7, 99.9%

High Purity Colloidal Silver Nano Silver Solution CAS 7440-22-4

High Purity Boron Carbide B4C Powder CAS 12069-32-8, 99%

High Purity Silicon Si powder CAS 7440-21-3, 99%

High Purity Tungsten Carbide WC Powder Cas 12070-12-1, 99%

High Purity 3D Printing Inconel 625 Powder

High Purity Spherical Graphite C Powder CAS 7782-42-5, 99.9%

High Purity Copper Oxide CuO powder CAS 1317-38-0, 99.9%

High Purity Colloidal Gold Nano Gold Solution CAS 7440-57-5

High purity Boron Powder Amorphous Boron Powder CAS 7440-42-8, 95%

CAS 4485-12-5 Lithium Stearate Powder

CAS 1592-23-0 Calcium Stearate Powder

CAS 557-04-0 Magnesium Stearate Powder

High Purity Zinc Sulfide ZnS Powder CAS 1314-98-3, 99.99%

High Purity Silicon Nitride Si3N4 Powder CAS 12033-89-5, 99%

High Purity Aluminum Nitride AlN Powder CAS 24304-00-5, 99.5%

Our Latest Metal Alloy

What is the difference between conductive graphite powder and graphite powder for rubber?

Conductive graphite powder, graphite powder for rubber, graphite powder for plastics, etc. are all graphite powder products. , Graphite powder for different purposes is processed by different processes.…

What is Properties and Applications of Titanium Alloy Ti6Al4V

Titanium alloy Ti6Al4V is a medium-strength α-β type two-phase titanium alloy containing 6% α-stabilizing element AI and 4% β-stabilizing element V.…

What is Inconel 625

Inconel 625 alloy is a non-magnetic, corrosion and oxidation resistant nickel-chromium alloy.…