High Purity Tungsten Carbide WC Powder Cas 12070-12-1, 99%

Recently, the International Energy Agency released its monthly report on the oil market. Affected by hot weather and soaring natural gas prices, some countries have had to change their ways of generating electricity and switch to oil-fired power generation, according to the report. At the same time, European industries, including oil refining, are also switching to fuel, so global oil demand this year will grow faster than previously forecast. The International Energy Agency expects global oil demand to be 99.7 million barrels a day in 2022. The IEA also said international oil prices had fallen to $30 a barrel from a peak in June due to increased oil supplies and heightened concerns about a deteriorating economic outlook.

Recently, Turkey and Russia have reached an agreement in principle to use rubles to pay for part of Russian natural gas, and the time and price of gas supply will be determined in the near future, Turkey's Minister of Energy and Natural Resources said. At the same time, the two sides are discussing the possibility of using the Turkish lira to cover part of the transit transport costs. On the 5th of this month, the presidents of Russia and Turkey held a meeting in Sochi. The two sides agreed that the two countries would start using rubles to settle part of Russia's natural gas supplies to Turkey.

Because of the turbulent international situation, the supply and prices of many international bulk tungsten carbide are still very uncertain.

About Tungsten Carbide WC Powder:
Tungsten carbide is a compound composed of tungsten and carbon. Tungsten carbide formula is WC, and Tungsten carbide molecular weight is 195.85.
Tungsten carbide color: The most basic form of tungsten carbide is a fine gray powder, but it can be pressed into shapes through a process called sintering for use in industrial machinery, cutting tools, abrasives, armor-piercing bullets, and jewelry.
 
The stiffness of tungsten carbide is about twice that of steel, and Young's modulus is about 530-700 GPa (77,000 to 102,000 ksi), which is twice the density of steel and is almost between lead and gold. Its hardness is comparable to that of corundum (α-Al2O3), and only cubic boron nitride and diamond powder, grinding wheels and compounds with high hardness abrasives can be used for polishing and finishing.
Tungsten carbide is also used to make tungsten carbide rings, tungsten carbide mens rings, tungsten carbide wedding bands, tungsten carbide mens wedding bands, etc. Because tungsten carbide rings price is cheaper than gold or platinum rings, and tungsten carbide is more scratch-resistant than any other metal, and available in a wide variety of styles, colors, and inlays, like black tungsten carbide rings, tungsten carbide rings gold.
 
Black tungsten carbide is a hexagonal crystal with metallic luster and hardness similar to that of a diamond. It is a good conductor of electricity and heat. Tungsten carbide is insoluble in water, hydrochloric acid and sulfuric acid, but easily soluble in a mixed acid of nitric acid and hydrofluoric acid. Pure tungsten carbide is fragile, and if a small amount of titanium, cobalt and other metals are added, the brittleness can be reduced. Tungsten carbide used as a steel cutting tool is often added with titanium carbide, tantalum carbide or their mixture to improve the anti-knock ability. Tungsten carbide is chemically stable. Tungsten carbide powder is used in cemented carbide production materials.

Feel free to send an inquiry to get the latest price of tungsten carbide if you would like to buy tungsten carbide powder in bulk.

Performance of of of Tungsten carbide WC powder :
Black hexagonal crystals; Melting point 2870 ° C ± 50 ° C; Boiling point 6000 ° C; Dissolved in mixed acid of nitric acid and hydrofluoric acid, also in aqua regia; Insoluble in cold water; The relative density of 15.63; Strong acid resistance; High hardness, High elastic modulus; Use for the production of various alloys. 

Technical parameters of Tungsten carbide WC powder :

 
How is Tungsten Carbide WC Powder produced?
Using metal tungsten and carbon as raw materials, tungsten powder with an average particle size of 3 to 5 μm and carbon black of the same amount are dry mixed with a ball mill, fully mixed, press-molded, and placed into a graphite plate, and then placed in a graphite resistance furnace Or it can be heated to 1400～1700℃ in an induction furnace, preferably 1550～1650℃. In the hydrogen stream, W2C is initially produced and continues to react at high temperatures to produce WC. Or firstly, tungsten hexacarbonyl is thermally decomposed at 650-1000°C in the CO atmosphere to obtain tungsten powder, and then reacted with carbon monoxide at 1150°C to obtain WC. Temperatures higher than this temperature can generate W2C.
Chemical reaction formula:
2W + C = W2C
W + C = WC
Tungsten trioxide WO3 is hydrogenated and reduced to prepare tungsten powder (average particle size 3～5μm). Then, the mixture of tungsten powder and carbon black in an equimolar ratio (dry-blended with a ball mill for about 10 hours) is press-formed under a pressure of about 1t/cm2. Put the pressurized material block into a graphite pan or crucible, and heat it to 1400～1700℃ (preferably 1550～1650) in a hydrogen stream (using pure hydrogen with a dew point of -35℃) using a graphite resistance furnace or an induction electric furnace ℃), carburizing will produce WC. The reaction starts from around the tungsten particles, because W2C is generated at the beginning of the reaction, and because the reaction is incomplete (mainly because the reaction temperature is low), unreacted W and intermediate W2C remain in addition to WC. Therefore, it must be heated to the above-mentioned high temperature. The maximum temperature should be determined according to the particle size of raw tungsten. For coarse particles with an average particle size of about 150 μm, the reaction proceeds at a high temperature of 1550 to 1650°C.
Chemical reaction formula:
WO3 + 3H2 → W + 3H2O
2WO3 + 3C → 2W + 3CO2
2W + C = W2C
W + C = WC

Applications of Tungsten Carbide WC Powder:
Tungsten carbide is widely used as high-speed cutting tools, furnace structural materials, jet engine parts, cermet materials, resistance heating elements, etc. Used to manufacture cutting tools, wear-resistant parts, melting crucibles for metals such as copper, cobalt, and bismuth, and wear-resistant semiconductor films.
Tungsten carbide is used as super-hard tool material and wear-resistant material.
Tungsten carbide can form a solid solution with many carbides. WC-TiC-Co cemented carbide tools have been widely used.
Tungsten carbide can also be used as a modified additive of NbC-C and TaC-C ternary system carbides, which can reduce the sintering temperature and maintain excellent performance. It can be used as aerospace materials.
Tungsten carbide (WC) powder can also be synthesized by using tungsten anhydride (WO3) and graphite in a reducing atmosphere at a high temperature of 1400～1600℃. Dense ceramic products can be obtained by hot pressing sintering or hot isostatic pressing sintering.
Tungsten carbide (WC) powder can also be used to produce high capability nano-crystalline or superfine horniness alloy, hard-face abrasion-resistant spraying and petrochemical cracking catalyst; Chipless forming tools; Cutting tools; Mining tolls; Nano-composites (for enhanced hardness, strength, and wear resistance); Erosion-resistant coatings; wear-resistance coatings; Corrosion-resistant coatings; Wear-resistant parts.

Storage Condition of Tungsten carbide WC powder :
Tungsten carbide WC powder dispersion performance and using effects, therefore, niobium carbide NbC powder should be sealed in vacuum packing and stored in a cool and dry room, the niobium carbide can not be exposure to air. In addition, the NbC powder should be avoided under stress.

Packing & Shipping of Tungsten carbide WC powder :
We have many different kinds of packing which depend on the niobium carbide NbC powder quantity.
Tungsten carbide WC powder packing: vacuum packing, 1kg/bag, 25kg/barrel, or as your request.
Tungsten carbide WC powder shipping: could be shipped out by sea, by air, by express as soon as possible once payment receipt.


Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including boride powder, nitride powder, graphite powder, sulfide powder, 3D printing powder, etc.
If you are looking for high-quality tungsten carbide powder, please feel free to contact us and send an inquiry. (sales3@nanotrun.com)

Overall, the demand for tungsten carbide is on the rise, and future tungsten carbide will continue to evolve. Although the prosperity of the brand name has rebounded, there are still many outstanding problems in tungsten carbide, and the tungsten carbide will develop steadily，if you need tungsten carbide please contact us.

Inquiry us